10
Browser-based setup
Use this setup method if you don’t have a WPS button on your router, or if you don’t
want to use WPS to set up your RE9000.
1.
Plug in the range extender
Plug in the range extender midway between your router and the area without Wi-Fi. Using
your mobile device or laptop, be sure you have at least two bars (around 50%) of your
router’s Wi-Fi signal at that location. If you don’t have two bars, move the range extender
closer to the router. You can move the range extender to an ideal location later using the
setup software.
To Next Page
Loading...
