Linksys PAP2 Installation Guide

Linksys PAP2 Installation Guide
Page 6
Proxy and Registration and Subscriber Information Sections
6. Scroll to the Audio Configuration section (as shown in the Audio Configurations
and Dial Plan Sections screen on the following page), and change the following
settings:
Field Value
Preferred Codec G729a
Use Pref Codec Only no
G729a Enable yes
G723 Enable yes
G726-16 Enable no
G726-24 Enable no
G726-32 Enable no
G726-40 Enable no
DTMF Tx Method AVT

Linksys PAP2 Specifications

General

Ports	2 FXS ports
Protocol Support	SIP v2, SDP
Voice Codecs	G.711, G.726, G.729A/B, G.723.1
Network Protocols	TCP/IP, UDP, DHCP, DNS, TFTP, HTTP
Security	Password protected system reset
Connectivity	10/100 Mbps Ethernet
Power Supply	5V DC