Linksys SPA1001

5-26
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
Regional Tab
CW Deact Code Disables call waiting on all calls.
The default is *57.
CW Per Call Act Code Enables call waiting for the next call.
The default is *71.
CW Per Call Deact Code Disables call waiting for the next call.
The default is *70.
Block CID Act Code Blocks caller ID on all outbound calls.
The default is *67.
Block CID Deact Code Removes caller ID blocking on all outbound calls.
The default is *68.
Block CID Per Call Act Code Blocks caller ID on the next outbound call.
The default is *81.
Block CID Per Call Deact Code Removes caller ID blocking on the next inbound call.
The default is *82.
Block ANC Act Code Blocks all anonymous calls.
The default is *77.
Block ANC Deact Code Removes blocking of all anonymous calls.
The default is *87.
DND Act Code Enables the do not disturb feature.
The default is *78.
DND Deact Code Disables the do not disturb feature.
The default is *79.
CID Act Code Enables caller ID generation.
The default is *65.
CID Deact Code Disables caller ID generation.
The default is *85.
CWCID Act Code Enables call waiting, caller ID generation.
The default is *25.
CWCID Deact Code Disables call waiting, caller ID generation.
The default is *45.
Dist Ring Act Code Enables the distinctive ringing feature.
The default is *26
Dist Ring Deact Code Disables the distinctive ringing feature.
The default is *46.