5-69
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
User 1/2 Tab
VMWI Ring Splash Len Duration of ring splash when new messages arrive before the VMWI signal is applied (0
– 10.0s).
The default is .5.
VMWI Ring Policy The parameter controls when a ring splash is played when a the VM server sends a SIP
NOTIFY message to the Linksys IP phone indicating the status of the subscriber’s mail
box. 3 settings are available:
New VM Available – ring as long as there is 1 or more unread voicemail
New VM Becomes Available – ring when the number of unread voicemail changes from
0 to non-zero
New VM Arrives – ring when the number of unread voicemail increases.
The default is New VM Available.
Ring On No New VM If enabled, the Linksys IP phone will play a ring splash when the VM server sends SIP
NOTIFY message to the Linksys IP phone indicating that there are no more unread
voicemails. Some equipment requires a short ring to precede the FSK signal to turn off
VMWI lamp.
The default is no.
Field Description
To Next Page
Loading...
