Linksys SPA1001

IN-1
Linksys ATA Administrator Guide
Document Version 3.01
INDEX
Symbols
**# command 5-71
**1 command 5-71
Numerics
404 Forbidden 3-18
A
Accept Last Act Code 5-25
Accept Last Caller parameter 5-66, 5-70
Accept Last Deact Code 5-25
Accept Last Serv parameter 5-41
accessing IVR 2-18
accounts, User and Administrator 2-23
administration privileges 2-23
administration web server
accessing
2-22
cannot access 3-18
enabling/disabling 2-20
port
check
2-20
using 2-22
Administrator
account name
2-23
Administrator account
for IVR
2-18
Admin Passwd 5-8
Ans Call Without Reg parameter 5-39, 5-53
Attn Transfer Serv parameter 5-42
Attn-Xfer Act Code 5-27
Auth ID 5-40, 5-54
Auth Resync-Reboot 5-36, 5-51
AVT Codec Name 5-16
AVT Dynamic Payload 5-15
B
bandwidth budget 2-14
binary format 3-4
Blind Attn-Xfer Enable 5-38
Blind Transfer Code 5-24
Block ANC Act Code 5-26
Block ANC Deact Code 5-26
Block ANC Serv parameter 5-41
Block ANC Setting parameter 5-67
Block CID Act Code 5-26
Block CID Deact Code 5-26
Block CID Per Call Act Code 5-26
Block CID Per Call Deact Code 5-26
Block CID Serv parameter 5-41
Block CID Setting parameter 5-67
Block Last Act Code 5-25
Block Last Caller parameter 5-66, 5-70
Block Last Deact Code 5-25
Block Last Serv parameter 5-41
Broadcast Bytes Dropped parameter 5-3
Broadcast Bytes Recv parameter 5-2
Broadcast Bytes Sent parameter 5-2
Broadcast Pkts Dropped parameter 5-3
Broadcast Pkts Recv parameter 5-2
Broadcast Pkts Sent parameter 5-2
Busy Tone 5-19