Linksys SPA1001

5-6
Linksys IP Phone Administrator Guide
Document Version 3.2
Chapter 5 Linksys ATA Field Reference
Info Tab
Call Type May take one of the following values:
• PSTN Gateway Call = VoIP-To-PSTN Call
• VoIP Gateway Call = PSTN-To-VoIP Call
• PSTN To Line 1 = PSTN call ring through and answered by Line 1
• Line 1 Forward to PSTN Gateway = VoIP calls Line 1 then forwarded to PSTN GW
• Line 1 Forward to PSTN Number =VoIP calls Line 1 then forwarded to PSTN number
• Line 1 To PSTN Gateway
• Line 1 Fallback To PSTN Gateway
VoIP State Same as Line 1 Call 1.
PSTN State May take one of the following values:
• Idle
• Collecting PSTN Pin
• Invalid PSTN PIN
• PSTN Caller Accepted
• Connected to PSTN
VoIP Tone Same as Line 1 Call 1 (Indicate what tone is being played to the VoIP call leg).
PSTN Tone Indicate what tone is being played to the PSTN call leg.
VoIP Peer Name Same as Line 1 Call 1 (Name of the party at the VoIP call leg).
PSTN Peer Name Name of the party at the PSTN call leg.
VoIP Peer Number Same as Line 1 Call 1 (Phone number of the party at the VoIP call leg).
PSTN Peer Number Phone number of the party at the PSTN call leg.
VoIP Call Encoder Same as Line 1 Call 1 (Audio encoder being used for the VoIP call leg).
VoIP Call Decoder Same as Line 1 Call 1 (Audio decoder being used for the VoIP call leg).
VoIP Call FAX Same as Line 1 Call 1.
VoIP Call Remote Hold Same as Line 1 Call 1.
VoIP Call Duration Same as Line 1 Call 1.
VoIP Call Packets Sent Same as Line 1 Call 1.
VoIP Call Packets Recv Same as Line 1 Call 1.
VoIP Call Bytes Sent Same as Line 1 Call 1.
VoIP Call Bytes Recv Same as Line 1 Call 1.
VoIP Call Decode Latency Same as Line 1 Call 1.
VoIP Call Jitter Same as Line 1 Call 1.
VoIP Call Round Trip Delay Same as Line 1 Call 1.