Linksys SPA9000 - Using the Wizard to Configure the Auto-Attendant

5-4
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 5 Configuring the LVS Auto-Attendant
Configuring Auto-Attendant
Using the Wizard to Configure the Auto-Attendant
You can use the Setup Wizard to customize a schedule for Auto-Attendant. To do this, complete the
following steps.
Step 1 Select Auto Attendant from the Advanced Feature Menu (see Figure 5-2).
Figure 5-2 Auto Attendant Option
The system displays Page 1, shown in Figure 5-3
Select Auto Attendant from the Advanced Feature Menu (see Figure 5-2).