4-7
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 4 Configuring SPA9000 Features
Using the Wizard to Configure SPA9000 Voice Features
Figure 4-9 Configure Hunt Groups
Step 2 Click Add Hunt Group to add a group.
Click Edit to change an existing group, or click Delete to remove a group.
When you click Add Hunt Group, the system displays the page shown in Figure 4-10.
Figure 4-10 Configure Hunt Group
Step 3 Identify the hunt group and click OK.
When the next screen reappears, the new hunt group is added.
Step 4 Click Submit to create the hunt group.
Using the Wizard for Localization
To use the wizard for setting localization settings for the SPA9000, complete the following steps.
To Next Page
Loading...
