Linksys SPA9000 - Setting the SPA9000 Administrator Account Password; Using the Administration Web Server; Connecting to the Administration Web Server

2-22
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 2 Getting Started
Setting the SPA9000 Administrator Account Password
Setting the SPA9000 Administrator Account Password
Complete the folllowing steps to change the Administrator password.
Step 1 Select Change Admin Password from the Advanced Features menu (see Figure 2-18).
The system displays the page shown in Figure 2-19.
Figure 2-18 Set SPA9000 Admin Password
Step 2 Type the Administrator password in the field provided.
Step 3 Type the password again in the Confirm Password field and click Submit.
Step 4 Click Submit to enter the configuration for the previous wizard pages.
Using the Administration Web Server
This section describes how to use the administration web server to configure the SPA9000. It includes
the following topics:
• Connecting to the Administration Web Server, page 2-22
• Administrator Account Privileges, page 2-24
Connecting to the Administration Web Server
To access the SPA9000 administration web server, perform the following steps.
Step 1 Launch a web browser on a computer connected to the SPA9000.