Linksys SPA9000 - Using the Wizard to Upgrade Software

2-18
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 2 Getting Started
Initial Setup and Configuration
Step 12 Click Submit.
The system displays the Main Menu of the Setup Wizard (see Figure 2-12).
Figure 2-12 SPA Setup Wizard—Main Menu
You can use the options on this menu to perform the following configuration operations:
• Software Upgrade—Upgrade the SPA9000, SPA400, or SPA900 series telephone software (see the
“Using the Wizard to Upgrade Software” section on page 2-18).
• Configure SPA400—Configure PSTN voice services and voicemail services using the SPA400 (see
the
“Using the SPA9000 Setup Wizard to Configure the SPA400” section on page 3-8.)
• Configure SPA9000—Configure voice services and voicemail with an ITSP (see the “Using the
Wizard to Configure ITSP Voice Services and Voicemail” section on page 3-1).
• Configure Client Stations—Configure the SPA900 series clients (see the “Configuring Client
Stations” section on page 4-2).
• Configure Advanced Features:
– Change the Administrator password (see the “Setting the SPA9000 Administrator Account
Password” section on page 2-22).
– Hunt groups, shared extensions, and other features (see the “Using the Wizard to Configure
SPA9000 Voice Features” section on page 4-1)
– Auto-Attendant (see the “Using the Wizard to Configure the Auto-Attendant” section on
page 5-4).
Using the Wizard to Upgrade Software
Step 1 Download and save the latest software for whatever devices you want to upgrade from the following
website:
www.linksys.com/upgrade
Step 2 Make a note of the folder where you save it locally because you need this information during the upgrade
process.
Step 3 Select Software Upgrade on the Main Menu (Figure 2-12).