3-6
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 3 Configuring Voice Service and Voicemail
Completing the Voicemail Configuration
Completing the Voicemail Configuration
This section is required to complete the voicemail configuration regardless of whether you use ITSP
voicemail, a third-party voicemail server, or the SPA400 local voicemail option.
Step 1 On Page 6 of the wizard, verify or complete the configuration of each line extension and enable the
Mailbox for each extension.
Figure 3-7 Configure the SPA9000 Internal Phone Extensions
Note When you check the mailbox, the extension uses the extension number for the mailbox ID
(MBID), which is the correct setting.
Step 2 After completing Page 6, click Next.
The system displays the page shown in Figure 3-8.
To Next Page
Loading...
