6-15
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
SIP Tab
Proxy Debug Option Controls what SIP messages to log that are received at or sent from the Proxy listen port.
Choices are as follows: {
• none—No logging.
• 1-line—Logs the start-line only for all messages,
• 1-line excl. OPT—Same as 1-line but excludes OPTIONS request/response.
• 1-line excl. NTFY—Same as 1-line but excludes NOTIFY request/response.
• 1-line excl. REG—Same as 1-line but excludes REGISTER request/response.
• 1-line excl. OPT|NTFY|REG—Same as 1-line but excludes OPTIONS, NOTIFY, and
REGISTER request/response.
• full—Logs all SIP messages in full text.
• full excl. OPT—Same as full but excludes OPTIONS request/response.
• full excl. NTFY—Same as full but excludes NOTIFY request/response.
• full excl. REG—Same as full but excludes REGISTER request/response.
• full excl. OPT|NTFY|REG—Same as full but excludes OPTIONS, NOTIFY, and
REGISTER request/response.
The default is is none.
Call Routing Rule Special dial plan that determines which line interfaces can be used for an external
outbound call request from client station based solely on the target public number. The
dial plan is in the (rule|rule|…|rule) format where:
• rule = <:Ln[,n[,n[,n]]]>pattern
• n = 1, 2, 3, or 4,
• pattern = any digit pattern (see <Dial Plan> on how to choose a digit pattern).
If the target number matches the pattern of a rule, the Line indices in the rule’s prefix are
the line interfaces that can be used to make that call. Matches are performed from left to
right, so make sure the most specific rules are placed first. For example:
The default is is (<:L1,2,3,4>9xx.), which specifies that any of the four line interfaces can
be used for any target number starting with 9.
Call Park MOH Server Specifies the MOH Server to be used to handle a parked call. For example:
mohs@192.168.1.1:5082.
If this parameter is not specified, the internal parking lot is used to host the parked call,
in which case the parked caller hears the internal music file.
The default is is imusic.
Call Park DLG Refresh Intvl Specifies the interval in seconds between refreshing a call park session. Default is 0,
which disables session refreshes.
Group 1/2/3/4 User ID Comma-separated list of user-id patterns. A client station whose user-id matches any of
the give patterns is considered as belonging to that group. If the user-id matches more than
one group, the smallest group number is assumed. If the user-id does not match any group,
the client station is considered as belonging to the default group (also known as Group 0).
Each user-id pattern allows * and ? wildcards as well as %xx escaped characters.
The default is is blank, so all client stations belong to the default group.
To Next Page
Loading...
