6-31
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
Regional Tab
Block CID Deact Code Removes caller ID blocking on all outbound calls.
The default is *68.
Block CID Per Call Act Code Blocks caller ID on the next outbound call.
The default is *81.
Block CID Per Call Deact Code Removes caller ID blocking on the next inbound call.
The default is *82.
Block ANC Act Code Blocks all anonymous calls.
The default is *77.
Block ANC Deact Code Removes blocking of all anonymous calls.
The default is *87.
DND Act Code Enables the do not disturb feature.
The default is *78.
DND Deact Code Disables the do not disturb feature.
The default is *79.
CID Act Code Enables caller ID generation.
The default is *65.
CID Deact Code Disables caller ID generation.
The default is *85.
CWCID Act Code Enables call waiting, caller ID generation.
The default is *25.
CWCID Deact Code Disables call waiting, caller ID generation.
The default is *45.
Dist Ring Act Code Enables the distinctive ringing feature.
The default is *26
Dist Ring Deact Code Disables the distinctive ringing feature.
The default is *46.
Speed Dial Act Code Assigns a speed dial number.
The default is *74.
Secure All Call Act Code Makes all outbound calls secure.
The default is *16.
Secure No Call Act Code Makes all outbound calls not secure.
The default is *17.
Secure One Call Act Code Makes the next outbound call secure. (It is redundant if all outbound calls are secure by
default.)
The default is *18.
To Next Page
Loading...
