Linksys SPA9000 - Page 182

6-34
Linksys SPA9000 Administrator Guide
Document Version 3.01
Chapter 6 SPA9000 Field Reference
Regional Tab
Field Description
Prefer G711u Code Makes this codec the preferred codec for the associated call.
The default is *017110.
Force G711u Code Makes this codec the only codec that can be used for the associated call.
The default is *027110.
Prefer G711a Code Makes this codec the preferred codec for the associated call.
The default is *017111
Force G711a Code Makes this codec the only codec that can be used for the associated call.
The default is *027111.
Prefer G723 Code Makes this codec the preferred codec for the associated call.
The default is *01723.
Force G723 Code Makes this codec the only codec that can be used for the associated call.
The default is *02723.
Prefer G726r16 Code Makes this codec the preferred codec for the associated call.
The default is *0172616.
Force G726r16 Code Makes this codec the only codec that can be used for the associated call.
The default is *0272616.
Prefer G726r24 Code Makes this codec the preferred codec for the associated call.
The default is *0172624.
Force G726r24 Code Makes this codec the only codec that can be used for the associated call.
The default is *0272624.
Prefer G726r32 Code Makes this codec the preferred codec for the associated call.
The default is *0172632.
Force G726r32 Code Makes this codec the only codec that can be used for the associated call.
The default is *0272632.
Prefer G726r40 Code Makes this codec the preferred codec for the associated call.
The default is *0172640.
Force G726r40 Code Makes this codec the only codec that can be used for the associated call.
The default is *0272640.
Prefer G729a Code Makes this codec the preferred codec for the associated call.
The default is *01729.
Force G729a Code Makes this codec the only codec that can be used for the associated call.
The default is *02729.