Linksys SPA9000 - Page 214

Index
IN-2
Linksys SPA9000 Administrator Guide
Document Version 3.01
XML scripts 5-13
automatic provisioning 2-27
AVT Codec Name 6-12
AVT Dynamic Payload 6-11
B
B2BUA 4-15
bandwidth budget 2-6
binary format 2-26
Blind Attn-Xfer Enable 6-43
Blind Transfer Code 6-29
Block ANC Act Code 6-31
Block ANC Deact Code 6-31
Block CID Act Code 6-30
Block CID Deact Code 6-31
Block CID Per Call Act Code 6-31
Block CID Per Call Deact Code 6-31
Block Last Act Code 6-30
Block Last Deact Code 6-30
bridge mode 4-33
Busy Tone 6-23
C
Call 1 Bytes Recv 6-4
Call 1 Bytes Sent 6-4
Call 1 Callback 6-3
Call 1 Decode Latency 6-4
Call 1 Decoder 6-3
Call 1 Duration 6-4
Call 1 Encoder 6-3
Call 1 FAX 6-3
Call 1 Jitter 6-4
Call 1 Packet Error 6-4
Call 1 Packets Lost 6-4
Call 1 Packets Recv 6-4
Call 1 Packets Sent 6-4
Call 1 Peer Name 6-3
Call 1 Peer Phone 6-4
Call 1 Remote Hold 6-3
Call 1 Round Trip Delay 6-4
Call 1 State 6-3
Call 1 Tone 6-3
Call 1 Type 6-3
Call Back Act Code 6-29
Call Back Active 6-3
Call Back Busy Act Code 6-29
Call Back Deact Code 6-29
Call Back Delay 6-28
Call Back Expires 6-28
Call Back Retry Intvl 6-28
Call Capacity 6-50
Callee Conn Polarity 6-46
Callee On Hook Delay 6-28
Caller Conn Polarity 6-46
Caller ID FSK Standard 6-36
Caller ID Method 6-36
call forward bridge mode 4-33
call forwarding 4-17, 4-33
call hunt groups 4-6
call management 4-13
Call Park 1-12
call park 4-26
Call Park DLG Refresh Intvl 6-15
Call Park MOH Server 6-15
call pickup 4-25
Call Redial Code 6-29
Call Return Code 6-29
Call Routing Rule 4-14, 6-15
call transfer bridge mode 4-33
candidate sequences 4-9
caring for hardware 2-7
Cfwd All Act Code 6-29
Cfwd All Deact Code 6-30
CFWD Bridge Mode 6-56
Cfwd Busy Act Code 6-30
Cfwd Busy Deact Code 6-30