Linksys SPA9000 - Page 222

Index
IN-10
Linksys SPA9000 Administrator Guide
Document Version 3.01
RFC 2543 Call Hold 6-8
Ring1 Cadence 6-25
Ring1 Name 6-26
Ring2 Cadence 6-25
Ring2 Name 6-26
Ring3 Cadence 6-25
Ring3 Name 6-26
Ring4 Cadence 6-25
Ring4 Name 6-26
Ring5 Cadence 6-25
Ring5 Name 6-27
Ring6 Cadence 6-25
Ring6 Name 6-27
Ring7 Cadence 6-25
Ring7 Name 6-27
Ring8 Cadence 6-25
Ring8 Name 6-27
Ring Back Tone 6-24
Ring Frequency 6-27
ringing once 2-32
ring tone, no 2-32
Ring Voltage 6-27
Ring Waveform 6-27
router, required for connectivity 2-2
routing rule 4-14
RTCP Tx Interval 6-11
RTP
media proxy
2-3
RTP CoS Value 6-38, 6-47
RTP Log Intvl 6-40
RTP Log Intvl parameter 6-49
RTP Packet Size 6-10
RTP Port Max 6-10
RTP Port Min 6-10
RTP ToS/DiffServ Value 6-38, 6-47
rules
dial plans
4-10
S
SAS DLG Refresh Intvl 6-42
SAS Enable 6-42
SAS Inbound RTP Sink 6-42
saving configuration 2-33
scenarios
call forwarding
4-17
script error, XML 5-13
scripts, Auto-Attendant 5-10
scripts, XML 5-13
secondary DNS server 2-16
Second Dial Tone 6-23
Secure All Call Act Code 6-31
Secure Call Indication Tone 6-24
Secure No Call Act Code 6-31
Secure One Call Act Code 6-31
Secure One Call Deact Code 6-32
secure provisioning 2-26
Send Resp To Src Port 6-13
sequences, dial plan 4-9
Serial Number 6-2
Service Annc Base Number 6-33
Service Annc Extension Codes 6-33
Session Initiation Protocol 1-6
set
multicast address
2-11
network mask 2-10
primary DNS server 2-11
static gateway IP address 2-10
static IP addressing 2-10
Set Local Date (mm/dd) 6-35
Set Local Time (HH/mm) 6-35
setup requirements 2-14
Setup Wizard
Auto-Attendant
5-4
configuring features 4-1
obtaining 2-13
use for initial configuration 2-3