Linksys SPA9x2 Phone Administration Guide 106
Dial Plan Parameters
Customizing SPA9x2 Extensions
Dial Plan Notes
This table describes all Dial Plan parameters:
Parameter
Description
Dial Plan Dial plan script for the selected extension.
The dial plan syntax allows the designation of three parameters for
use with a specific gateway:
• uid – the authentication user-id
• pwd – the authentication password
• nat – if this parameter is present, use NAT mapping
Separate each parameter with a semi-colon (;).
Example 1:
*1xxxxxxxxxx<:@fwdnat.pulver.com:5082;uid=jsmith
;pwd=xyz
Example 2:
*1xxxxxxxxxx<:@fwd.pulver.com;nat;uid=jsmith;pwd
=xyz
Example 3:
[39]11<:@gw0>
The phone recognizes locally configured PSTN gateways (represented
by “gw0” in the above example).
See Appendix B "Configuring a Dial Plan" for more detailed
information.
Caller ID Map Inbound caller ID numbers can be mapped to a different string. For
example, a number that begins with +44xxxxxx can be mapped to
0xxxxxx. This feature has the same syntax as the Dial Plan parameter.
With this parameter, you can specify how to map a caller ID number
for display on screen and recorded into call logs.
Enable IP Dialing Enable or disable IP dialing.
Defaults to no.
To Next Page
Loading...
