Linksys SPA922

Linksys SPA9x2 Phone Administration Guide Cisco Confidential--First Draft160
Phone Tab
SPA9x2 Phone Field Reference
Supplementary Services
Enable or disable the corresponding supplementary services on the phone. A value of “yes”
indicates enabled; “no” indicates disabled.
Registering LED LED Pattern when the corresponding extension is trying
to register with the proxy server. Leaving this entry blank
indicates the default value of c=r;p=s.
Call Back Active LED Call Back operation is currently active on this call
appearance is not shared. Leaving this entry blank
indicates the default value of c=r;p=s.
Parameter
Description
Conference Serv Enable/disable Three way conference service.
Defaults to yes.
Attn Transfer Serv Enable/disable attended-call-transfer service.
Defaults to yes.
Blind Transfer Serv Enable/disable blind-call-transfer service.
Defaults to yes.
DND Serv Enable/disable do-not-disturb service.
Defaults to yes.
Block ANC Serv Enable/disable block-anonymous-call service.
Defaults to yes.
Call Back Serv Enable/disable call-back (a.k.a. repeating dialing) service.
Defaults to yes.
Block CID Serv Enable/disable blocking outbound Caller-ID service.
Defaults to yes.
Secure Call Serv Enable/disable secure-call service.
Defaults to yes.
Cfwd All Serv Enable/disable call-forward-all service.
Defaults to yes.
Parameter
Description