Linksys SPA922

Linksys SPA9x2 Phone Administration Guide 68
Distinctive Ring Patterns
Setting Regional Parameters
Distinctive Ring Patterns
Ring cadence defines the ringing pattern that announces a telephone call.
Ring Pattern Notes
The default cadence script for eight ring patterns is shown in the figure above.
Control Timer Values (sec)
Control Timer Value Notes
The following table describes all control timer parameters. Each value is displayed in seconds.
Field
Description
Reorder Delay Delay after far end hangs up before reorder tone is played. 0 = plays
immediately, inf = never plays. Range: 0–255 seconds.
Defaults to 255.
Call Back Expires Expiration time in seconds of a call back activation. Range: 0–65535
seconds.
Defaults to 1800.
Call Back Retry Intvl Call back retry interval in seconds. Range: 0–255 seconds.
Defaults to 30.