33
Chapter 6: Configuring the Wireless-N Access Point
The Administration - Reboot Tab
Wireless-N Access Point with Power Over Ethernet
The Administration - Reboot Tab
On this screen you can reboot the Access Point.
Reboot
This feature is useful when you need to remotely reboot the Access Point.
Device Reboot. To reboot the Access Point, click the Yes radio button.
Click Save Settings to apply your change and the Access Point will reboot itself, or click Cancel Changes to
cancel your change. Help information is displayed on the right-hand side of the screen.
Figure 6-22: Administration - Reboot
To Next Page
Loading...
