Wireless-G Access Point
List of Figures
Figure 3-1: Front Panel 6
Figure 3-2: Back Panel 7
Figure 4-1: Connect the Ethernet Network Cable 8
Figure 4-2: Connect the Power 8
Figure 5-1: Welcome Screen 9
Figure 5-2: Connect the Network Cable to the Router or Switch Screen 10
Figure 5-3: Connect the Network Cable to the Access Point Screen 10
Figure 5-4: Power on the Access Point Screen 11
Figure 5-5: Check the Access Point’s Status Screen 11
Figure 5-6: Select the Access Point Screen 12
Figure 5-7: Password Screen 12
Figure 5-8: Basic Settings Screen 13
Figure 5-9: Configure Wireless Settings Screen 13
Figure 5-10: SecureEasySetup Screen 14
Figure 5-11: SecureEasySetup Logo 14
Figure 5-12: Additional Information - Hardware Button 14
Figure 5-13: Additional Information - Software Button 14
Figure 5-14: Configure Wireless Settings Screen 15
Figure 5-15: Confirm New Settings Screen 15
Figure 5-16: Congratulations Screen 16
Figure 5-17: Configure Wireless Settings Screen 17
Figure 5-18: Wireless Settings Screen 17
Figure 5-19: Security Settings Screen 18
Figure 5-20: WEP Settings Screen 18
Figure 5-21: WPA Personal Settings 19
Figure 5-22: WPA2 Personal Settings Screen 19
Figure 5-23: WPA2 Mixed Mode Settings Screen 20
Figure 5-24: Confirm New Settings Screen 21
To Next Page
