EasyManua.ls Logo

Linsar SC2101 - Explanation of Symbols; Safety; Safety Notes

Linsar SC2101
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Explanation of symbols
The following symbols and signal words are used in this user manual, on the device or
on the packaging.
This symbol provides you with useful additional information on
handling and use.
Declaration of conformity (see chapter “Declaration of conformity”):
Products marked with this symbol meet all the applicable Community
regulations of the European Economic Area.
CAUTION: Risk of scalding.
Safety
The following signal words are used in this user manual.
This signal symbol/word denotes a hazard with an
average risk level that could lead to death or severe
injury if it is not avoided.
WARNING!
This signal symbol/word denotes a hazard with a
low risk level that could lead to mild or moderate
injury if it is not avoided.
CAUTION!
This signal word provides a warning about
potential material damage.
NOTE!
Safety notes
Risk of electric shock!
WARNING!
A faulty electrical installation or excessive mains voltage may result
in an electric shock.
- Connect the steam cleaner only if the mains voltage of the
socket corresponds to the nameplate specification.
- Only connect the steam cleaner to a properly installed socket
with an earthing contact.
48

Table of Contents