EasyManua.ls Logo

Linsar SC2101 - Page 52

Linsar SC2101
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Danger of scalding!
WARNING!
Hot steam escapes from the device during use. Parts of the device
become hot.
- Never remove the water tank lid while you are using the device.
-
After use, let the device cool down and unplug it from the
socket before emptying it or removing the accessories.
-
After use, release the residual pressure from the boiler by
pressing the steam button on the pistol. When doing so, direct
the steam jet into a suitable container.
- Do not touch the hot parts of the device with bare fingers
during operation. Also point out the dangers to other users.
-
Note that hot steam can escape from the device even after it
has been switched off.
-
After operation, allow the device to cool down for 30 minutes
before putting it back into operation.
Risk of injury!
WARNING!
Improper handling of the device can cause injuries.
- Only use the device with the supplied accessories and spare
parts that have been approved by the manufacturer.
-
Let the attached accessories cool down first before taking them
off.
-
Do not use the device if it has fallen down, or if it is visibly
damaged or leaking.
- Do not try to steam clean hazardous substances (such as
asbestos) with the device.
- Never point the steam jet directly at people or pets. Hot steam
can cause serious injuries. Observe your surroundings.
52

Table of Contents