Round brushes
The round brush 21 and small round brush 20 are used to remove tough dirt, e.g. from
hot plates or tile joints. They can also be used to remove traces of limescale in the
sanitary area.
Slantbeak
The Slantbeak 19 is used to reach hard-to-reach places, such as dirt deposits on
radiators, blinds and in the sanitary area.
Pane puller
The pane puller 13 with a window cloth 17 is designed for cleaning window panes and
mirrors, for example. It can also be used to remove limescale deposits from smooth
surfaces such as shower boxes. After cleaning smooth surfaces, remove the window
cloth and wipe the cleaned surfaces with the pane puller.
- Attach the pane puller to the pistol (see chapter Attaching accessories).
- Stretch a window cloth over the pane puller.
Floor brush
The floor brush 12 is used to clean floor surfaces using the floor cleaning cloth 16.
1. Insert the floor brush adapter 14, with the locking opening facing downwards, into
the floor brush.
If the adapter cannot be inserted without resistance, move it back and forth.
2. Turn the adapter 180°.
3. Connect the floor brush adapter to the extension tubes 15.
4. Place the floor brush in the middle of the floor cleaning cloth.
5. Press and hold the clips on the floor
brush.
6. Guide the respective sides of the floor
cleaning cloth under the clips.
7. Release the clips.
The floor brush is prepared for attachment to
the pistol.
61
To Next Page
Loading...