Safety
Linx 5900 & 7900 Quick Start Guide (x) FA69315–3 English
Emergency shutdown procedure
If the printer needs to be stopped quickly due to an emergency, set the
Mains Power Supply Switch on the rear panel of the printer to the '0' (off)
position.
Figure 1. Mains Power On/Off Switch on the rear panel
If there is a hazard that prevents safe access to the Mains Power Supply
Switch, operate the local electrical isolator switch for the printer.
Noise emissions
The noise emission level from this printer does not exceed 70 dBA. This
means that there is no hazard to hearing from long-term exposure to noise
from the printer, and therefore no requirement for ear protection to be
worn.
49145
To Next Page
Loading...
Need help?
General
