6
lci1.com 574-537-8900 Rev: 12.24.19
Flex Guard
Installation and Owner’s Manual
(For Aftermarket Applications)
CCD-0002722
Fig.5
6. Slide any hoses and wiring through the holes in the
Flex Guard clips when installing in order to protect hoses
and wiring with the Flex Guard.
NOTE: Flex Guard should be kept parallel to the slide
room floor.
7. Make sure the at end of the Flex Guard is mounted
several inches away from the direction of the bend of the
retracted Flex Guard (Fig.4A and Fig.5A).
slide-out retracted (I-beam web installation option)
Fig.4
A
slide-out retracted (outrigger installation option)
room bar
room bar
mounting
bracket
mounting
bracket
A
To Next Page
Loading...
