Lippert Components OneControl X1 - Table of Contents; Introduction

Rev: 08.31.20 Page 2 CCD-0002697
TABLE OF CONTENTS
Introduction 2
Safety 3
Resources Required 3
Installation 4
Wiring 5
Conguring Inputs, Outputs 6
Latching Relays 7
Reverse Polarity Outputs 13
Saving Conguration 18
Loading Conguration 19
Introduction
The OneControl X1 Control Board will primarily be operated by a phone app utilizing a Bluetooth
connection. Users can access and adjust a system via a touchscreen icon. If the trailer already has
a OneControl Touch Panel, then the controller can be tied into the OCTP by CAN bus harness. The
configurator kit supplied to OEMs must be used to program the configurable inputs and the latching and
reversing outputs.
For information on the assembly or individual components of this product, please visit:
https://support.lci1.com/electronics-support-onecontrol-wireless-formerly-myrvreg .
NOTE: Images used in this document are for reference only when assembling, installing and/or operating
this product. Actual appearance of provided and/or purchased parts and assemblies may differ.