Lippert Components OneControl - Controlling RV Functions: Awnings and Leveling; Awning Operation; Leveling System Operation

Rev: 08.06.18
Page 8
CCD-0001736
6. When in the fuse configuration menu, a list of all labeled and unlabeled relay functions will appear (Fig.
21). Select the fuse location from the drop down menu on the right (Fig. 21A and Fig. 22).
Fig. 21
A
Fig. 22
7. Once all fuse locations are chosen, press and HOLD anywhere on the screen for a pop up menu
confirming the fuse locations. Press and hold the sync button on the multifunction receiver (Fig 23A).
While holding the sync button, press "OK" on the "Send All" prompt (Fig. 24A). This will program all
fuse positions.
A
Fig. 23
Fig. 24
A