Lippert Components OneControl Programming Manual

Rev: 08.06.18
Page 9
CCD-0001736
Operation
Power On/Off
1. To power ON the tablet, hold and release the power button for 2-3 seconds (Fig. 25).
NOTE: It will take a few moments to start up and load the system.
2. To enter or exit sleep mode, press and release power button.
3. To power OFF the tablet, press and hold the power button until a utility screen appears.
4. Select "Power off".
5. Press “OK” when confirmation box displays: “Your tablet will shut down.” (Fig. 27).
Volume Button
1. Volume control is located on the side of the tablet (Fig. 25). There is also a volume icon on the menu
screen.
Reset
Volume Control
Charging Port
Micro USB
Headphone Jack
Power Button
Microphone
TF/Micro SD
Card Port
Fig. 25
Fig. 26
Fig. 27

Lippert Components OneControl Specifications

General

Brand	Lippert Components
Model	OneControl
Category	Tablet
Language	English