Lippert Components OneControl Programming Manual

Rev: 08.06.18
Page 5
CCD-0001736
5. Select the relay (latching or reversing polarity) switch or tank sensor to assign a title (Fig. 7).
6. When window pops up select “Rename” (Fig. 8).
7. Select “Group”.
8. Select “Name”.
9. Press “Send” to set group and name selected (Fig. 9).
10. Repeat process for each function.
Circuit Building For OneControl
®
Smart Switch
1. Press “Build Circuit” (Fig. 10).
Fig. 7 Fig. 8
Fig. 9
Fig. 10

Lippert Components OneControl Specifications

General

Brand	Lippert Components
Model	OneControl
Category	Tablet
Language	English