Rev: 03.26.20 Page 2 CCD-0001371
Introduction
The Solera® Slide Topper with Access Plates is a high-quality, cost-effective way to help keep slide-outs
free of dirt, leaves and debris. The Solera® Slide Topper is permanently attached to the slide-out and
retracts/extends with the room.
Additional information about this product can be obtained from lci1.com/support or by using the myLCI
app. Replacement kits can be ordered from https://store.lci1.com/ or by using the myLCI app.The myLCI app
is available for free on iTunes® for iPhone® and iPad® and also on Google Play™ for Android™ users.
iTunes®, iPhone®, and iPad® are registered trademarks of Apple Inc.
Google Play™ and Android™ are trademarks of Google Inc.
For information on the assembly or individual components of this product, please visit
https://support.lci1.com/solera-slider-awning.
Safety
Read and understand all instructions before installing or operating this product. Adhere to all safety labels.
This manual provides general instructions. Many variables can change the circumstances of the instructions,
i.e., the degree of difficulty, operation and ability of the individual performing the instructions. This
manual cannot begin to plot out instructions for every possibility, but provides the general instructions,
as necessary, for effectively interfacing with the device, product or system. Failure to correctly follow the
provided instructions may result in death, serious personal injury, severe product and/or property damage.
TABLE OF CONTENTS
Introduction 2
Safety 2
Resources Required 3
Installation 3
Installing the Awning Rail (If Necessary) 3
Assemble the Extension Rod and Cap 4
Installing the Solera Slide Topper Access Plate 4
Installing the Solera Slide Topper Access Bracket 6
Installation of Solera Slide Topper Assembly 7
Securing the Fabric 9
Troubleshooting 9
Failure to follow the instructions provided in this manual may result in death, serious injury, unit
damage or voiding of the component warranty.
The "WARNING" symbol above is a sign that a procedure has a safety risk involved and may cause death
or serious personal injury if not performed safely and within the parameters set forth in this manual.
The “CAUTION” symbol above is a sign that a safety risk is involved and may cause personal injury
and/or product or property damage if not safely adhered to and within the parameters set forth
in this manual
To Next Page
Loading...
Need help?
General
