What does 'PANIC STOP Function Aborted' mean on my Lippert leveling Controller?
The 'PANIC STOP Function Aborted' error on your Lippert Controller means a button was pressed on the touch pad during an automatic operation. Restart the automatic operation and avoid pressing any buttons on the touch pad.
What to do if my Lippert Controller shows a 'Bad Calibration' error?
A 'Bad Calibration' error on your Lippert Controller indicates that the sensor calibration values are out of range. Replace the controller.
What does an 'Internal Sensor' error mean on my Lippert leveling Controller?
An 'Internal Sensor' error on your Lippert Controller indicates an internal sensor problem. Replace the controller.
What to do if the Lippert Ground Control 3.0 switch does not activate the landing gear?
If the Lippert Automobile Accessories switch isn't activating the landing gear, there could be a couple of reasons. First, check the battery voltage under load; it might need charging or replacing. Secondly, inspect the wiring for any damage and repair or replace it as needed.
Step-by-step process of how the auto-leveling feature operates.
How to manually operate jacks using override procedures.
Procedure for manually overriding jacks via the motor's top port.
General| Type | Automatic Leveling System |
|---|---|
| Power Source | 12V DC |
| Material | Steel |
| Number of Jacks | 4 |
| Control | Wireless Remote Control |
| Features | Manual Override |
| Leveling Time | Under 3 minutes |
| Warranty | 1 Year Limited Warranty |
To Next Page
