12 LR-3200 Receiver Manual
ADVANCED PROGRAM FEATURES AND LISTEN’S IDSP SOFTWARE SUITE
To manage the advanced program features on any of the iDSP™ receivers a windows based User Interface (UI)
software is required.
This software is available free of charge from Listen Technologies. To download the software log onto
http://www.listentech. com/support/software/idsp-software-suite/ and follow the instructions.
With the UI software, direct communication is provided via the Micro USB connection on the receiver. Once
connected the UI software provides setup and adjustment of the following functions of the LR-3200 receiver.
Note: A help le for the UI software is included with the download and will provide detailed instructions for set up
and management of all the advanced program features of the LR-3200 receiver.
Super Quiet Mode
To reduce background noise and increase the audio quality, Listen oers a noise reduction technology called
Listen SQ™. Only Listen *transmitters and receivers have SQ™ available, both the transmitter and receiver
must have SQ™ activated to achieve the improved sound quality performance. This LR-3200 receiver
has been shipped to you with the SQ™ feature disabled.
SQ™ Summary:
Improves noise performance by at least 20 dB
SQ must be enabled for both the transmitter and receivers
SQ™ is NOT Squelch
SQ™ is NOT compatible with other manufactures’ products
SQ™ can be disabled to permit operation with early Listen products or other manufactures, products
Note: The LT-803 does not have the SQ™ feature. The LT-800 has the SQ™ feature.
Basic Channels and Expanded Channels Modes
Your Listen receiver has been shipped with the Basic Channel Mode enabled.
In the default Basic Channel Mode, only A, E and H channels are available for selection. If the channel desired
is not available in Basic Channel Mode, the receiver will need to be set to the Expanded Channel Mode.
In Expanded Channel Mode all 17 wide band and channels are available for selection.
Auto Power Mode
The auto power mode will automatically power the receiver on when the unit is removed from the charging
device. When the unit is returned to the charging device the unit will automatically turn o and resume
charging operation. Your Listen receiver has been shipped to you with the Auto Power Mode enabled.
Unit ID
The unit ID number provides a unique identication for each receiver. This allows the software to keep track
of a specic unit. This can be any 3 digit number between 000 and 999. The unit ID allows venues to track
individual units and for easy dispensing and inventory control. Your Listen receiver has been shipped to you
with a Unit ID of 000.
Default Volume
Each time the LR-3200 is powered on the headset volume level is set to 35% which is the default level.
To change the default volume level setting adjust the software slider to the desired level. The slider
can be adjusted in 5% increments from 5% to 100%.
To Next Page
Loading...