LR-3200 Receiver Manual 9
4. Connect Earphone
Using The Earphone/Neck Loop yard:
Connect the Listen Intelligent ear phone/
neck loop lanyard to the two 3.5 mm output
jacks on the unit. Then connect the short
cable ear speaker or headphones to the
3.5mm output jack on the lanyard. The
lanyard neck loop is placed over the head
and worn as a necklace.
This is the preferred method of wearing the
receiver for best performance!
For T-coil compatible hearing aid use simply
disconnect the ear speaker or headset from
the ear phone/neck loop lanyard.
Using The 3.5mm Earphone Extension Cable: If the receiver is to be clipped to a belt, waistband or inside a
pocket a long extension cable is used. Connect the extension cable to the ear speaker, headset or earphones,
then connect the extension cable into one of the 3.5 mm output jacks on top of the receiver.
To Next Page
Loading...