LR-3200 Receiver Manual 13
Unit Information
When a unit is connected to the conguration software the software extracts specic information from the
unit and displays it for the user. This information includes the model number, frequency, Serial Number,
battery level, and Firmware Version.
Reset to Factory Defaults
The unit can be returned to its factory default settings at any time by using the iDSP Software Suite.
Firmware Update
The rmware update function will check via the internet to see if a rmware update is available
for the receiver.
RF RECEPTION MAXIMIZATION STRATEGIES:
For proper and reliable operation, Listen receivers should receive a strong and consistent signal from the
originating transmitter. Follow these strategies should be used to maximize this signal:
a. When designing and installing a system, keep in mind that the location of both the transmitter
and receivers is critical to maximizing signal strength
b. Eliminate or minimize obstructions between the transmitter and receivers
c. Minimize the distance between the transmitter and receivers
d. Move transmitter and receivers away from metal objects
e. Place the transmitting antenna as high as possible (on stationary transmitters)
f. Orient both transmitting and receiving antennas vertically
g. On portable transmitters and receivers, the cable from the microphone or headset is the antenna;
ensure that the cable is not coiled or laying horizontal
CAUTION: When installing remote antennas, ensure the antenna is clear of power lines. Coaxial cable,
connectors, and optional antenna mounting kits are available from Listen. Visit www.listentech.com
or ask your dealer for details.
To Next Page
Loading...