14
During playback, press "OK" to display the menu options shown above. Select the corresponding icon, and
press "OK " to execute the operation. User can press "Back " to exit playback, or press " and
on the remote control to perform shortcut operations.
Settings
Network Settings:
Select Network Settings under
Settings in the Android, and press
" OK".
Wired Network Settings:
Prior to use of wired
network, first connect one end of the network
cable to the network port on the product, and the
other end to the router.
1.
If your router is set to allow automatically
obtaining an IP address, select Advanced
Options> DHCP for IP Configuration, and press
"OK"; the product will automatically obtain an IP
address.
2.
If your router is not set to allow automatically
obtaining an IP address, you must complete network connection by the following steps (select Static in IP
configuration);
3.
Select IP Address, and configure an available IP address for the product;
4.
Select Default Gateway, and configure an available gateway for the
product;
5.
Select Network Prefix Valid Length, and configure a valid length of subnet mask for the product;
6.
Select Preferred DNS1 and Alternate DNS2, and configure an available DNS server address for the product;
8.
Select Subnet Mask, and configure an available subnet mask for the product;
9.
Select Save, and press "OK"; the system will give a prompt indicating the setting is finished.
To Next Page
Loading...
General