11
The Charging Dock (continued)
• Power Cord – Provides power to the charging dock from a wall outlet.
• Power Indicator – Lights up green when plugged into a wall outlet and blinks green when
charging the Lively Mobile2.
• Charging Contacts – Allows charging of your Lively Mobile2 when docked.
• Health Check Button – Check that your Lively Mobile2 is operating correctly.
IMPORTANT
INFORMATION
You can check the status of your Lively Mobile2 anytime by placing your device in the charging
dock and pressing the Health Check Button. This will conirm your battery, network connection and
Fall Detection (if applicable) are working properly and your device is ready to use.
The charging dock is not waterproof. Do not place the charging dock in areas where it can get
wet. If your device happens to get wet, please be sure to dry it before placing it into the charging
dock. Failure to do so may cause an electrical shock or ire hazard. The Lively Mobile2 is rated to be
submerged in up to 3.3 feet of water for up to 30 minutes
Getting Started
To Next Page
Loading...
