Page 54 Pulse
TM
Smartpen User Manual
3. Within 5 seconds of double-
tapping, write either “time” or
“date.”
TIP: With predictive text, your Pulse smartpen
will display the first command that matches your
written input. In this case, d[ate] or t[ime] is
displayed as soon as you write a “d” or “t.” As
soon as you see the command you want on the
display, you can stop writing.
4. Wait briefly or double-tap on
the page near where you
wrote the command.
5. Your Pulse smartpen will
display the date or time.
6. Once you have written a
Quick Command, you can tap
where you wrote it to repeat
the command.
In addition to the Quick Command, there are three other methods of checking the current Time &
Date.
• Tap on the printed controls
on the inside cover of your notebook under
Status.
To Next Page
Loading...
