HIRO BUGGY Stroller for Special Needs Children Revision 2 Page 17
The front upholstery is attached at the bottom sides with hook-and-loop fasteners and with a magnet in the middle. From
the front part, along the entire length of the sides, the upholstery is fastened with a zip fastener. Having been unfastened, the
upholstery can be folded and pulled upwards into the special pocket on the top of the upholstery.
Fig. 20
8 Accessories
8.1 Chest supports
The chest supports (1) ensure correct position and stabilisation of the child’s trunk. The supports can also be used to
improve the body posture. The height and width adjustment of the chest supports is possible after loosening the knobs located at
the back of the backrest. After setting up the chest supports, tighten the knobs.
To Next Page
Loading...