HIRO BUGGY Stroller for Special Needs Children Revision 2 Page 19
8.4 Podnóżek
Footrest is intended to support foots during ride. To adjust footrest there is need to unscrew wingnuts on carriage bolts (2)
and move footrest (1) in position allowing comfortable resting foots Błąd! Nie można odnaleźć źródła odwołania. After getting
satisfying position fix wingnuts for locking footrest.
Fig. 24
8.5 Headrest
The headrest (1) is responsible for supporting the child’s head when he or she cannot keep their head in the correct
position. The headrest can be attached using a hook-and-loop fastener on the upholstery of the backrest or above the backrest if
required. In order to mount the headrest above the backrest, unfasten the zip fastener located in the upper middle of the
backrest upholstery, leaving a slot of approximately 15 cm. Then, unfasten the knobs (2) located at the back of the backrest and,
holding the knobs (2), slide out the headrest bracket (3), to which the headrest needs to be mounted. After setting the headrest
position, tighten the knob (2).
To Next Page
Loading...