LIXiSE LXC3120 User Manual

LXC31X0/LXC93X0 Generator controller user manual
Dongguan Tuancheng Automation Equipment Co.,LTD.
LXC31X0/LXC39X0 User Manual Dongguan Tuancheng Automation Equipment Co.,LTD.
: T:+86 769-23162896 : F:+86 769-23166296  :www.lixise.com Page 11 of 28
9
Gen Over
Current
When the controller detects that the genset current has exceeded the pre-set value
and delay is not 0, it will initiate a shutdown alarm and the corresponding alarm
information will be displayed on LCD.
10
Fail To
Start
If the engine does not fire after the pre-set number of attempts, it will initiate a
shutdown alarm and the corresponding alarm information will be displayed on LCD.
11
Gen Over
Frequency
When the controller detects that the genset frequency has exceeded the pre-set
value, it will initiate a shutdown alarm and the corresponding alarm information will
be displayed on LCD.
12
Gen Under
Frequency
When the controller detects that the genset frequency has fallen below the pre-set
value, it will initiate a shutdown alarm and the corresponding alarm information will
be displayed on LCD.
13
Genset
Failed
When the controller detects that the genset frequency is 0, it will initiate a shutdown
alarm and the corresponding alarm information will be displayed on LCD.
14
Low Fuel
Level
When the controller detects that the fuel level has fallen below the pre-set value or
detects that the low fuel level input is active, it will initiate a shutdown alarm and the
corresponding alarm information will be displayed on LCD.
15
Low
Coolant
Level
When the controller detects the low coolant level input is active, it will initiate a
shutdown alarm and the corresponding alarm information will be displayed on LCD.
16
Temp.
Sensor
Open
When the controller detects that the temperature sensor is open circuit and the
action select “Shutdown”, it will initiate a shutdown alarm and the corresponding
alarm information will be displayed on LCD.
17
Oil
Pressure
Sensor
Open
When the controller detects that the oil pressure sensor is open circuit and the
action select “Shutdown”, it will initiate a shutdown alarm and the corresponding
alarm information will be displayed on LCD.
6. Connections
Compared with LXC3X20, LXC3X10 has no Mains AC Voltage input terminals.
The rear panel of LXC3X10 and LXC3X20 is as below.

LIXiSE LXC3120 Specifications

General

Brand	LIXiSE
Model	LXC3120
Category	Controller
Language	English