LIXiSE LXC31X0 Series User Manual

LXC31X0/LXC93X0 Generator controller user manual
Dongguan Tuancheng Automation Equipment Co.,LTD.
LXC31X0/LXC39X0 User Manual Dongguan Tuancheng Automation Equipment Co.,LTD.
: T:+86 769-23162896 : F:+86 769-23166296  :www.lixise.com Page 1 of 28
LXC31X0/LXC39X0
Series Genset Controller
LXC31X0/LXC39X0 User Manual
Ver1.3 Date: 2015/03/19
Software version
Date
Versio
n
Note
2012-06-12
1.0
Original release.
2014-12-26
1.1
Flywheel teeth configuration items increase：(When
genset has no magnetic sensor,please set to 5 to
close magnetic sensor)
2015-02-09
1.2
Add LXC39X0 introduction
2015-03-19
1.3
Application picture updated
LXC31X0/LXC39X0 Series

LIXiSE LXC31X0 Series Specifications

General

Brand	LIXiSE
Model	LXC31X0 Series
Category	Controller
Language	English

Summary

Software Version

Clarification of Notation

Summary

Performance and Characteristics

Overview of the controller's capabilities and features.

Specification

Operation

Push Buttons

Details the function and operation of each push button on the control panel.

Indicator Light

Explains the different indicator lights and their meanings.

Automatic Start/Stop Operation

Auto Start Sequence

Details the sequence of events for automatic engine starting.

Auto Stop Sequence

Details the sequence of events for automatic engine stopping.

Manual Start/Stop Operation

Protection

Warnings

Lists and describes warning conditions that do not cause shutdown.

Shutdown Alarm

Connections

Parameters Setting

Password Management

Details how to manage technician and operator passwords for system access.

Language

Mode Select

Definition and Range of Parameters

Programmable Input 1-4 Table

Programmable Output 1-5

Sensor Select

Conditions of Crank Disconnect

Custom Sensor Curve Setup

Sensor Unit Conversion Table

Commissioning

Typical Application Wiring

Installation

Fixing Clips

Describes the method for securing the controller using panel fixing clips.

Dimensions and Panel Cutout

Fault Finding

Product Packaging