Press ▲ button, display reads type
SPR
Press and hold * and press ▲ button until display reads type
SOAK
Press ▲ button, display reads si.nt
10.0
Press and hold * and press ▲ or ▼ button to change time in minutes you wish
program to run, display reads si.nt
720
Press ▲ button, display reads EOP
3D
Press and hold * and press ▲ button, display reads EOP
3E
Press ▲ button, display reads SEG
2
Press and hold * and press ▲ button, display reads SEG
Add
Press ▲ button, display reads type
SPR
Press and hold * and press ▲ button until display reads type
Step
Press ▲ button, display reads t.SP
0.0 (current set-point)
Press and hold * and press either ▲ or ▼ button until set-point is reached
15ºC
Press ▲ button, display reads EOP
3E
Press and hold * and press ▲button until display reads EOP
3D
Press ▲ button, display reads SEG
3
Press and hold * and press ▲ button, display reads SEG
Add
Press ▲ button, display reads type
SPR
Press and hold * and press ▲ button until display reads type
SOAK
Press ▲ button, display reads si.nt
10.0
To Next Page