Press and hold * and press ▲ or ▼ button to change time in minutes you wish
program to run, display reads si.nt
720
Press ▲ button, display reads EOP
3D
Press ▲ button, display reads SEG
4
Press and hold * and press ▲ button, display reads SEG
Add
Press ▲ button, display reads type
SPR
Press and hold * and press ▲ button until display reads type
LOOP
Press ▲ button, display reads PCYC
1
Press and hold * and press ▼ button until display reads PCYC
Cont
Press ▲ button, display reads EOP
3D
Press ▲ button until display reads SEG
5
Press and hold both the ▲ and ▼ buttons together for 3 seconds to finish the
programming. The display will return to show Actual and Set-point temperatures.
To Run Program
Press both ▲ and ▼ buttons together for 3 seconds, display reads LEUL
P
Press ▲ button until display reads run
Off
Press and hold * and press ▲ button, display reads run
On
Press both ▲ and ▼ buttons together for 3 seconds. The program will now run
To Next Page