CHAPTER 8: OPERATION 8-11
EXPRESS 332 S2
4. SETTINGS
Please read the safety instructions provided at the beginning of this manual before
handling the following devices.
4.1. Description
The EXPRESS 332 S2 has several parameters and functions allowing the operator to configure it so that
it adapts as closely as possible to the lathe on which it is installed, as well as to the production mode
under way.
The position of the flag, or the quantity of material left to be machine, can be known at any time by
checking the remote control.
The pushing torque of the motor is automatically selected according to the bar stock diameter.
When hexagonal or squares bars must be loaded, the servo motor intelligently manages the loading into
the lathe.
This section indicates the activating and setting procedures for these functions.
To Next Page
Loading...
