Need help?Do you have a question about the LNS QUICK LOAD SERVO 80 S2 BARFEED and is the answer not in the manual?
Details on page numbering, chapter titles, model identification, and cross-references.
Covers copyright, reproduction rights, and disclaimers of responsibility from LNS SA.
Declaration of machinery compliance with EU directives and harmonized standards.
Guidelines for safe operation, handling, and maintenance of the bar feed system.
Description of safety features and security analysis for machine incorporation.
Specifications for weight, dimensions, diameters, lengths, feed rates, and cycles.
Illustrates floor space requirements and retraction possibilities for system placement.
Identifies and describes the main components and their locations on the bar feeder.
Details on delivery methods, unpacking procedures, and handling precautions.
Step-by-step instructions for mounting the retraction device and system components.
Procedures for securing the bar feed system to the ground for stability.
Instructions for making electrical and interface connections to the lathe.
General description of electrical components and safety for handling.
Layout and description of components housed within the main electrical cabinet.
Details on connecting the bar feed to the lathe, including power supply and signals.
Description of the loading magazine capacity, dimensions, and operational features.
Details on the pusher carrier, its drive mechanism, and locking/unlocking logic.
Information on the loading pusher and its replacement for different bar diameters.
Description of the three feeding pushers and their specific operational ranges.
Explanation of the retraction system for longitudinal or lateral movement of the bar feeder.
Description of the optional kit for loading shafts of a defined, constant length.
Description of the optional pusher for loading shafts of varying lengths.
Description of the optional kit extending guiding length and providing a front protection cover.
Description of the adjustable front protection cover for the working gap.
Description of the orientation kit for accurate positioning of square bar stocks.
Overview of various software options for specialized operations like part counting and optimization.
Procedure for safely powering up the bar feed system using the main switch.
Procedure for safely powering down the bar feed system.
Description of the remote control interface, display, buttons, and functions.
Information on clamping methods using collets and 3-jaws chucks for bar stock.
Overview of parameters and functions for configuring the bar feed system for specific lathes.
Details the sequence of movements during the bar feeder's automatic operation cycle.
Procedure for adjusting the end of bar position to control the loading cycle.
Procedure for setting the top-cut position for accurate bar loading and spindle insertion.
Function to locate original positions of the servo motor and system parameters.
Quick selection of preconfigured applications and working modes for the bar feeder.
Examples and procedures for setting bar feed parameters related to specific machined parts.
Covers battery replacement, cleaning, and the use of spare parts.
Details on requirements and specifications for the LNS Parts Library.
Lists and describes the applicable functions for managing parts in the library.
Procedure for adding part parameters to the memory module and the library.
Steps for loading and deleting part files from the memory module.
Information regarding the start-up initialization process of the Parts Library.
Procedures for accessing and backing up library files using an FTP client.
A form to be filled out for ordering parts or supplies from LNS.
An example illustrating programming sequences for lathe and bar feed interaction.
Contact information and website addresses for LNS regional offices.
General| Brand | LNS |
|---|---|
| Model | QUICK LOAD SERVO 80 S2 BARFEED |
| Category | Industrial Equipment |
| Language | English |
To Next Page