CHAPTER 4: ELECTRICS 31
QUICK LOAD SERVO 80 S2
1. ELECTRICAL EQUIPMENT
Please read the safety instructions provided at the beginning of this manual before handling
the following devices.
Particular attention should be given to the handling of electrical elements because of risks
of electrocution. In case of possible electrical malfunctions, it is advisable to contact LNS
or their local representative.
Description
This chapter contains all of the elements regarding the electrical circuit of the bar feeder. The electrical
parts, and groups, which may require a setting, at some time or other, are described herein in detail.
Whenever possible, the article numbers of the elements are shown in tables below each drawing.
.
To Next Page
Loading...
