LNS Express 332 S2 - Declaration of Compliance

1-4 CHAPTER 1: BASIC NOTIONS
EXPRESS 332 S2
3. DECLARATION OF COMPLIANCE
EC DECLARATION OF CONFORMITY
We declare that the following machinery complies with the next directives :
- Machinery Directive: 98/37/EC
- Low Voltage Directive: 2006/95/EC
- EMC Directive: 2004/108/EC
Manufacturer : LNS SA
Route de Frinvillier
CH- 2534 Orvin
Suisse
Compiling relevant technical information : Plaseco Kurt De Pauw
Chemin des Petits-Clos 12
CH- 1744 Chénens
Suisse
Description of the machine : Automatic barfeed system
Type : EXPRESS 332 S2
Serial number : (see number on official document)
The following transposed harmonised standards have been used :
- Concerning the Machinery Directive :
 EN 14121 - 1 & 2 : Safety of machinery – Risk assessment,
 EN 12100 - 1 & 2 : Safety of machinery – Basic concepts & principles,
 EN 294 : Safety of machinery – Safety distances,
 EN 13850 : Safety of machinery – Emergency stop equipment,
 EN 953 : Safety of machinery – Conception of movable guards,
 EN 954-1 : Safety of machinery – Safety related parts of control systems,
 EN 1037 : Safety of machinery – Prevention of unexpected start-up,
 EN 1088 : Safety of machinery – Interlocking devices,
 EN 60204-1 : Safety of machinery – Electrical equipment of machines,
 CEI 60812 : Safety of machinery – FMECA Analysis,
- Concerning the Low Voltage Directive :
 IEC 60439-1/3 : Low-voltage switchgear and control gear assemblies
- Concerning the EMC Directive :
 EN 61000-6-4 : Generic emissions standard, Industrial environment
 EN 61000-6-2 : Generic immunity standard, Industrial environment
Place and date : Seal and signature :