SECTION 2.5
6
2.5 Resetting Your Lock
Press Reset Button for one (1) second or till you hear a short beep
See page 5 for re-pairing your lock to the LOCKLY app
In order to restore your lock to factory default settings, you must have your
“Activation Code” available. The Activation Code is specific to your lock and is
located on the Activation Code Card included with you smart lock, see page (5).
To reset, push the reset button located under the battery cover, in the lower right
corner. WARNING: once the smart lock has been reset, all previously stored data
will be deleted.
To add your lock to the mobile app have your activation code available and refer
to “Pair Lock with LOCKLY app” on page 5.
Reset Button
Under battery cover
To Next Page
Loading...
Need help?
General
