9
Declaration of Conformity
In accordance with the EC Regulations for Electro-Magnetic Compatibility 89/336/EWG, Appendix I
Manufacturer
declares that the unit designated in the following is, as a result of its design and construction, in accordance with the
European regulations, harmonized standards, national standards and technical specifications listed below.
Designation of the unit Semi-Automatic Controller
Unit number 97102
Applicable EC Regulations EC Regulations for Electro-Magnetic Compatibility
89/336/EWG in the version 93/68/EWG
Applicable harmonized standards EN 50082-1 1992; EN 55014 / 4.1993;
IEC 801-2, 3, 4
For changes to the unit that were not approved by Loctite, this declaration loses its validity.
Tallaght Business Park
Whitestown,
Tallaght, Dublin 24, Ireland
Loctite (Ireland) Ltd.
Declaration of Conformity
In accordance with the EC Machine Regulations 89/392/EWG, Appendix II A
Manufacturer
declares that the unit designated in the following is, as a result of its design and construction, in accordance with the
European regulations, harmonized standards, national standards and technical specifications listed below.
Designation of the unit Semi-Automatic Controller
Unit number 97102
Applicable EC Regulations EG-Machine Regulations 89/392/EWG, version 93/68/EWG
Applicable harmonized standards DIN EN 292 Part 1 11.1991; DIN EN 292 Part 2 11.1991
Date / Manufacturer’s signature 1995
Information regarding the Signer President – Worldwide Manufacturing (Peter G. Dowling)
For changes to the unit that were not approved by Loctite, this declaration loses its validity.
Tallaght Business Park
Whitestown,
Tallaght, Dublin 24, Ireland
Loctite (Ireland) Ltd.
47
-Declarations of Conformity
To Next Page
Loading...
